| Elements |
Min (%) |
Max (%) |
| Cu |
61.00 |
62.00 |
| Pb |
1.60 |
2.50 |
| Sn |
- |
0.20 |
| Fe |
- |
0.20 |
| Al |
- |
0.05 |
| Ni |
- |
0.30 |
| Total Others |
- |
0.20 |
| Zn |
Remainder |
Mechanical Properties According To EN12164 CW606N (As Per Temper 400)
| Range (Inch) |
From |
To |
UTS Min (N/mm²) |
PS Min (N/mm²) |
Elongation Min (%) |
Hardness Min |
Hardness Max |
| Round (Dia) |
2 |
20 |
400 |
200 |
12 |
- |
- |
| Hex (A/F) |
2 |
25 |
400 |
200 |
12 |
- |
- |
| Square (A/F) |
2 |
25 |
400 |
200 |
12 |
- |
- |
| PHYSICAL PROPERTIES |
| Melting Point |
885° |
| Density |
8.50g/cm3 |
| Electrical Resistivity |
0.066 x 10-6Ωm |
| Thermal Conductivity Btu/ sq ft/ ft hr/ °F at 68°F |
115 W/m.K |
| Modulus of Elasticity |
105 Gpa |
| FABRICATION PROPERTIES |
| Technique |
Suitability |
| Hot Formability |
Good |
| Cold Formability |
Good |
| Cold Reduction Between anneals |
50% |
| Machinability rating (free cutting brass = 100) |
75% |
| Soldering |
Excellent |
| Brazing |
Good |
| Oxy-acetylene welding |
Not recommended |
| Not recommended |
Not recommended |
| Resistance welding : Spot and Seam |
Not recommended |
| Butt Welding |
Fair |
